2013 Land Pride RC3615

<< Back to 2013 Land Pride Rotary Cutters

2013 Land Pride RC3615

Land Pride's RC3615 Rotary Cutter is ideal for maintaining grazing areas for horses or mowing the wide open spaces close to town. The 15' cutting width and ability to cut weeds and brush up to 2.5" in diameter make them well suited for these applications. The 36 Series offers a pull-type self leveling tongue with a clevis hitch for attachment to 50-160 hp tractors, and features a Cat. 5 main driveline. Safety guards around the cutter are offered in either

Pricing/Color Information




Surpassed rugged industry standards; All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures.

Factory assembled-Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.

160 HP Divider gearbox and 110 HP wing gearboxes-A rugged heavy built gearboxs capable of handling heavy cutting applications.

Gearbox seal protection; Gearbox bottom seal protection for longer bearing life.

Smooth Top Design; Allows for easy cleaning of deck.

Low tongue weight; Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.

Narrow tongue construction; Allows for a tighter turning radius.

Input Driveline: Cat. 5 CV; Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.

Wing driveline: Cat. 4 with slip-clutch; Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load instead of twisting the driveline. (Optional Cat. 5 driveline is available.)

Slip-clutch drivelines; Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.

High Blade tip speed; Allows clean cutting of material.

6” Blade overlap; Eliminates skipping during turns.

Left wing rotates clockwise; Better discharge of material. Picks up tractor tracks.

3/16” Round stump jumper; Standard thick stump jumper material keeps damage to a minimum.

1/4” Sidewall thickness; Increased thickness reduces damage from objects being thrown into deck sidewalls.

Self-leveling hitch; Reduces drawbar wear by keeping hitch level while going through ditches.

Hinged wing sections; Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows can cause uneven cutting.

1” Solid hinge rods; Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.

Wing transport locks; Wing transport locks securely hold the wings in the folded position in case of hydraulic failure.

Enclosed front to rear dual leveling rods; Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain.

5-Bolt hubs; 5-Bolt hubs makes the wheel assembly more durable and longer lasting.

Spring cushioned center-axle; Protects unit from bumps and ground shock.

Replaceable wheel spindles; Wheel spindles can be replaced when damaged without replacing the entire axle assembly.

2013 Land Pride RC3615



(Min. PTO) 50
(Gearbox) 540 RPM or 1000 RPM/160 HP Divider/110 HP Center & Wings


Gear Box
(Lubrication) Gear Lube 80-90W EP
(Capacity) Splitter: 3.5 pints; Center deck & Wings: 6 pints
(Input Driveline 540 & 1000 PTO) ASAE Category 5 with constant velocity u-joint or conventional (non-cv) u-joint
(Intermediate & Wing Drivelines) Standard-Category 4 with Slip-Clutch


(Transport) Spring-cushioned on center transport axle
(Hubs) Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts


Cutting Capacity
2 1/2”
(Machine)-Hitch weight = 1,300 lbs
Total weight = 3,840 lbs.
Blade Tip Speed
At 540 RPM Center Blades = 15,268 FPM & Wing Blades = 15,000 FPM
At 1000 RPM Center Blades = 15,578 FPM & Wing Blades = 14,620 FPM
(Cutting) 15' (4.572m) (Minimum Transport) 7'-11 3/4" (2.432m)
Overall Length
15'-6" (4.724m) With center deck raised fully up
Deck Height

General Information

Cutting Height
2” - 14”
(Hydraulics) 3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
(Wing Hydraulics) 2 1/2" x 12" hydraulic cylinders, hoses & fittings
(Wing Transport Protection) Wing Transport Locks
Deck Material
(Thickness) 10 gauge
(Side Skirt Thickness) 1/4"
Skid Shoe
Wing Deck: 1 Replaceable shoe per wing
Center Deck: 2 Replaceable shoes
Number of Blades
6 (2 per Carrier) 1/2” x 4” Heat Treated/Free Swinging Alloy Steel with Uplift
(Overlap) 6"
(Bolt) Keyed with hardened flat washer & lock nut
(Stump Jumper / Blade Holder) 3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar
(Weight) 1,240 lbs.
(Types) Standard Clevis, Double Swivel Clevis, Bar-Tite, Ball or Pintle Hitch
(Jack) - Standard (5,000 lbs.)
(Types) Standard Clevis, Double Swivel Clevis, Bar-Tite, Ball or Pintle Hitch
(Jack) Standard (5,000 lbs.)
(Hitch Type) Clevis
(Hitch Jack) 5,000 lbs.
(Intermediate & Wing Drivelines) Category 4 with Slip-Clutch
(Color) Beige
Overall Unit and Driveline: One year Parts and Labor/Gearbox: 5 years on Parts and Labor/Hydraulic Cylinders: One year Parts and Labor/Hoses and Seals: Considered wear items/Blades, tires and driveline friction discs: Considered wear items (see complete Warranty Statement).
Number Wheels
6-Wheels: 4 on transport axle and 1 on each wing axle


Request a quote for: 2013 Land Pride RC3615

Estimated Time For Purchase:*
If you see this field, leave it blank:
Characters Remaining

While we attempt to ensure display of current and accurate data, this listing may not reflect the most recent transactions or may reflect occasional data entry errors. All inventory listed is subject to availability and prior sale. Please consult dealership personnel for details. Prices are quoted for the US only and may not include dealer preparation, transportation, taxes, or other applicable charges. Photographs may be representative only and may vary somewhat from the actual items offered for sale.